AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Piezo Curves

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Wayne, what's the scale on KSN1038? [message #33525 is a reply to message #33523]

Tue, 10 July 2001 01:44

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

The frequency response chart for the KSN-1038 is broken into a grid showing 5dB increments with bold lines, and 1dB increments with fine lines, in between. It shows output averaging 105dB with 4v RMS input, measured at a distance of 18". To translate this to 2.83v/M, subtract 9dB. The ripple shown is only about 3dB.

http://www.pispeakers.com/KSN1041_hires_graph.gif

Report message to a moderator

[Message index]

		Piezo Curves By: Andy G on Fri, 06 July 2001 21:13
		Re: Piezo Curves By: Wayne Parham on Sat, 07 July 2001 00:18
		Might be a good idea to save them to your computers. !! By: Andy G on Sat, 07 July 2001 03:41
		Thanks,Andy! By: Paul C. on Sat, 07 July 2001 16:11
		Wayne, what's the scale on KSN1038? By: AudioLapDance on Mon, 09 July 2001 15:27
		Re: Wayne, what's the scale on KSN1038? By: Wayne Parham on Tue, 10 July 2001 01:44
		Request of Andy G? By: AudioLapDance on Wed, 11 July 2001 01:09
		Re: Request of Andy G? By: Andy G on Wed, 11 July 2001 02:27
		Done! nt By: Andy G on Wed, 11 July 2001 02:40
		Hey Andy, are there any others that look flat? By: AudioLapDance on Wed, 11 July 2001 19:57
		Re: Hey Andy, are there any others that look flat? By: Wayne Parham on Wed, 11 July 2001 22:11
		Re: Hey Andy, are there any others that look flat? By: Andy G on Thu, 12 July 2001 05:48
		Big thanks to Andy! By: AudioLapDance on Thu, 12 July 2001 09:42
		Hmm, not sure about these piezos ... Wayne? By: AudioLapDance on Wed, 11 July 2001 20:19
		Re: Hmm, not sure about these piezos ... Wayne? By: Wayne Parham on Wed, 11 July 2001 22:05
		Hmm-ing, now aha-ing! By: AudioLapDance on Thu, 12 July 2001 00:10
		Ah, crap! By: AudioLapDance on Sat, 14 July 2001 15:36
		Re: Piezo Curves By: Nihilist on Wed, 06 February 2013 13:39
		Re: Piezo Curves By: JCDC on Wed, 06 February 2013 14:55
		Re: Piezo Curves By: Wayne Parham on Wed, 06 February 2013 15:15
		Re: Piezo Curves By: Nihilist on Wed, 06 February 2013 16:55
		Re: Piezo Curves By: JCDC on Wed, 06 February 2013 17:12
		Re: Piezo Curves By: JCDC on Wed, 06 February 2013 17:20
		Re: Piezo Curves By: JCDC on Wed, 06 February 2013 17:31
		Re: Piezo Curves By: Nihilist on Wed, 06 February 2013 21:05

Previous Topic:	Flanking Subs vs Helper Woofers, revisited
Next Topic:	Notes on Ironing Veneer, Using Watco and ... a distress signal?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 10:15:08 CST 2024