AudioRoundTable.com: Pi Speakers » Piezos / 2 way designs

Home » Sponsored » Pi Speakers » Piezos / 2 way designs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Sounds great! It may be getting time for me to break out the table saw. NT [message #33356 is a reply to message #33355]

Tue, 15 May 2001 11:23

Paul C.
Messages: 218
Registered: May 2009

Master

Dave: I have used earlier Pyles (MH1560) in bass reflex speakers, and they worked just fine. Boxplot (and I will send you a plot I ran on these three) looks good, too. The 1188's are about 96db, and the woofers you list at 97.5 db SPL, you are only talking 1.5 db difference... hardly worth worrying about.

I just ran the 1578 specs thru BoxPlot for my brother, and with a 5 cft ported cabinet, F3=52 hz, two 3" dia x 3.2" long ports. With 8 cft you can get down to about 45 hz.

The 15128, in a 5.14 cft box, F3=44hz, 2 ports 3" dia x 1.61" L. The 96.6 db SPL should match the 1188 well.

Report message to a moderator

[Message index]

		Piezos / 2 way designs By: Paul C. on Wed, 09 May 2001 12:00
		Re: Piezos / 2 way designs By: Paul C. on Wed, 09 May 2001 12:19
		Re: Piezos / 2 way designs By: Stan C. on Wed, 09 May 2001 12:32
		Re: Piezos / 2 way designs By: Paul C. on Wed, 09 May 2001 14:09
		Re: Piezos / 2 way designs By: Paul C. on Sun, 20 May 2001 07:56
		Re: Piezos / 2 way designs By: Crazy Dave on Thu, 10 May 2001 12:48
		Re: Piezos / 2 way designs By: Paul C. on Thu, 10 May 2001 13:31
		Re: Thanks, you make a very strong agument for this driver! NT By: Crazy Dave on Thu, 10 May 2001 15:50
		Re: Thanks, you make a very strong agument for this driver! NT By: Paul C. on Thu, 10 May 2001 19:04
		Re: Thanks, you make a very strong agument for this driver! By: Crazy Dave on Fri, 11 May 2001 12:36
		Re: Thanks, you make a very strong agument for this driver! By: Paul C. on Fri, 11 May 2001 18:12
		Re: Thanks, you make a very strong agument for this driver! By: Crazy Dave on Sat, 12 May 2001 22:53
		Re: Thanks, you make a very strong agument for this driver! By: Paul C. on Sun, 13 May 2001 01:58
		Re: I hope everyone interested in piezos reads this whole thread By: Crazy Dave on Mon, 14 May 2001 11:25
		Re: I hope everyone interested in piezos reads this whole thread By: Paul C. on Mon, 14 May 2001 12:47
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Crazy Dave on Mon, 14 May 2001 13:44
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Paul C. on Mon, 14 May 2001 16:39
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Crazy Dave on Tue, 15 May 2001 09:15
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Paul C. on Tue, 15 May 2001 11:23
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Crazy Dave on Wed, 16 May 2001 09:46
		Re: Sounds great! It may be getting time for me to break out the table saw. NT By: Paul C. on Tue, 15 May 2001 11:59
		Lens info!!! By: Paul C. on Fri, 11 May 2001 10:49
		Re: Piezos / 2 way designs By: DJ Z on Mon, 14 May 2001 17:09
		Re: Piezos / 2 way designs By: Jon Risch on Wed, 16 May 2001 23:39

Previous Topic:	Stage monitors -- doubled Pi 4s?
Next Topic:	Pi implementations of quartz piezoelectric tweeters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 20:53:46 CST 2024