AudioRoundTable.com: Pi Speakers » braces for enclosures?

Home » Sponsored » Pi Speakers » braces for enclosures?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

...and fill holes with hardwood plugs. [message #33225 is a reply to message #33222]

Fri, 20 April 2001 18:24

Wayne_Parham
Messages: 123
Registered: May 2009

Master

I forgot to add that we drill the holes in the back and bottom of the cabinet. After filling the "dead chambers" with expansion foam, we install hardwood plugs in the holes. This makes an attractive solution.

Hardwood plugs are available at most hardware stores. They're usually available in many sizes, and I prefer to use the 1/2" diameter plugs. They're essentially 1/2" dowel rods that have been cut into 3/8" length sections. That's another way to create plugs for exotic woods - if premade plugs can't be found.

Report message to a moderator

[Message index]

		braces for enclosures? By: jazzbo on Thu, 19 April 2001 12:03
		Re: braces for enclosures? By: Wayne Parham on Thu, 19 April 2001 15:49
		Speaking of bracing By: Randy Bey on Fri, 20 April 2001 07:12
		ten Pi injection foam - VERY IMPORTANT By: Wayne_Parham on Fri, 20 April 2001 07:40
		...and fill holes with hardwood plugs. By: Wayne_Parham on Fri, 20 April 2001 18:24
		Window foam.. By: Jack Gilvey on Sat, 21 April 2001 10:03

Previous Topic:	Can one upgrade bass drivers at a later date?
Next Topic:	Making speakers "disappear"

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 01 12:45:52 CST 2025