AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » folded horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

folded horn [message #33206]

Tue, 17 April 2001 20:02

boblaz@yahoo.com
Messages: 5
Registered: May 2009

Esquire

I want to build a folded horn cabinet since I do not have useable corners in my room for the corner horns.
Size in and of itself is not a problem. I want extended low frequency response and smooth mid/highs. I already own and use Klipsch LaScalas.

Recomendations please.

Report message to a moderator

Re: folded horn [message #33209 is a reply to message #33206]

Tue, 17 April 2001 23:37

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Check your mail. If size really isn't a concern, I think you'll love the Pi folded basshorn. If it's too big, check back with me and we'll look at something else.

Report message to a moderator

Re: folded horn [message #33216 is a reply to message #33206]

Thu, 19 April 2001 10:58

str8aro
Messages: 12
Registered: May 2009

Chancellor

If size isn't a problem, build a real horn! However, I doubt this is really the case...

John

Report message to a moderator

Re: folded horn [message #33219 is a reply to message #33216]

Thu, 19 April 2001 16:21

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

That's true, there's no replacement for displacement. This is more true for basshorns than anything else. If they're not big enough, they get peaky. I'd rather have a good bass-reflex system than an undersized peaky basshorn. But when properly made, the basshorn rules. You just have to be able to make 'em big. Hoffman's Iron Law says there's no free lunch. Extension, efficiency or compact size, take any two.

Report message to a moderator

Re: folded horn [message #33220 is a reply to message #33219]

Thu, 19 April 2001 17:34

str8aro
Messages: 12
Registered: May 2009

Chancellor

Hi Wayne,

Of course if you have the room, the horns are better than vented boxes. Since the horn is more effiecent and requires less diaphragm motion, you get less distortion from suspension non-linearities and voice coil heating. But it's still big... Actually, though, my current horn design is only about 48 cubic feet and it'll theoretically do 135dB + on only 500watts. At that level, the cone would be moving 1.1mm.... :> Not sure how that compares size wise to vented boxes, but since I'm only after the low distortion and high dynamics, well, it doesn't particularly matter...

I'm hoping to complete construction in the three months of summer. Definitely not full time, though. Just weekends and free time. I don't think it will be too hard... One side of the horn is flat, the two curved sides will be kerfed plywood laminated together, and the other side, well, it will be interesting, but I don't think it will be too bad...

John

Report message to a moderator

Previous Topic:	Is the Pi Seven with a JBL 2226 recommended for use with a SETA?
Next Topic:	Can one upgrade bass drivers at a later date?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 21:59:44 CST 2024