Scott R Placke
OEM Business Development Mgr.
Parts Express Int'l Inc.
Phone: 1-866-366-4909 ext.108

Email me for the construction directions (Word file and gif drawings), enclosure drawings, parts list, crossover schematic, etc. I'll be glad to send this information to you even if you're not planning to build a pair but are just curious about them.

Scott and I did not discuss how long the discount will be available, so if you're serious about building a pair it's probably not a good idea to wait too long.

• The ART Arrays

Perhaps we could put the document we worked on, together with the box design and crossover layout onto the GroupBuild Forums Projects area.

I'm not sure who does this, I assume you need permission from the moderator, etc.

Anyone else know?

Also, I made a change to the tweeter crossover that I like. With the stock crossover I hear a bit of very high frequence grunge. Adding a 1.5 ohm non inductive resistor in series with the 10uF tweeter cap smooths this out quite a bit. Adding the resistor apparently has little effect on the lower treble, but it attenuates the high treble just a bit. The sound of decaying cymbals, etc, improves quite a bit.