AudioRoundTable.com: Group Build » SE 300B Project, Part 13

Home » Audio » Group Build » SE 300B Project, Part 13 - The finished amp

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: SE 300B Project, Part 13 - The finished amp [message #31947 is a reply to message #31942]

Wed, 16 August 2006 14:43

horny
Messages: 11
Registered: May 2009

Chancellor

hello Damir
I tryed the led and i like it more then a resistor and 220uf Nichicon Muse capacitor
The thin sound that i write was because the tubes are new
later the sound become fuller and fuller and to full

then the amp was a little to dark the led brings it a little on the back right way the sound get also very very clean i like it but other builder maby find it to clean

i had 3 to 3,2 volt cathode bias with the 280 ohm resistor and 190v on the anode (c3g)
with the red leds i have 3.65 and 210 volt on the anode
have i used the wrong leds?
can i leave it this way or must i chance it?
regards Robert

Report message to a moderator

[Message index]

		SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 26 June 2006 12:25
		Re: SE 300B Project, Part 13 - The finished amp By: Wayne Parham on Mon, 26 June 2006 16:03
		Re: SE 300B Project, Part 13 - The finished amp By: Forty2wo on Sun, 02 July 2006 14:57
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 03 July 2006 06:08
		Re: SE 300B Project, Part 13 - The finished amp By: Forty2wo on Mon, 03 July 2006 17:01
		Re: SE 300B Project, Part 13 - The finished amp By: duderduderini on Thu, 01 November 2007 07:12
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Sun, 09 July 2006 13:26
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 10 July 2006 07:08
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Tue, 11 July 2006 09:23
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Tue, 11 July 2006 10:08
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Tue, 11 July 2006 10:37
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Tue, 11 July 2006 11:33
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Fri, 21 July 2006 04:19
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Fri, 21 July 2006 07:46
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Fri, 21 July 2006 08:38
		Re: SE 300B Project, Part 13 - The finished amp By: Wayne Parham on Fri, 21 July 2006 09:24
		Wow! :-) By: Damir on Fri, 21 July 2006 14:06
		Re: Wow! :-) By: horny on Sat, 22 July 2006 04:56
		Re: Wow! :-) By: Damir on Sun, 23 July 2006 07:14
		Re: Wow! :-) By: horny on Sat, 29 July 2006 03:59
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Sun, 13 August 2006 04:04
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Sun, 13 August 2006 16:00
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Wed, 16 August 2006 14:43
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Thu, 17 August 2006 07:45
		Re: SE 300B Project, Part 13 - The finished amp By: red on Wed, 01 August 2007 06:24

Previous Topic:	Any new project ideas for winter?
Next Topic:	Spare me some IXP10M45S ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 14 16:19:57 CDT 2024