AudioRoundTable.com: Group Build » SE 300B Project, Part 13

Home » Audio » Group Build » SE 300B Project, Part 13 - The finished amp

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: SE 300B Project, Part 13 - The finished amp [message #31930 is a reply to message #31926]

Fri, 21 July 2006 04:19

horny
Messages: 11
Registered: May 2009

Chancellor

hi Damir
I build the amp and tryed the C3g and ec8010 first i must say i build the amp with ux245 as output tube.
I used the C3g driver stage as you post here
and the ec8010 at 150v /20m.
The ec8010 is very good more hights and more bass then the c3g
but the hights are not sparkeling ,not loose. More like an transistor amp.
Very impressive but i think not for a long time.
The c3g has more fluidness (sorry for the strange talk) i try to explane sound thats not easy

the sound is also more clean
and there is a good balance in the whole freq.spectrum

So the c3g is staying
i like it !!!
For me this sounds best but i think that others may like the ec8010 more.

Then i tried the ec8010 and the c3g with the same operation points
interstage coupled.
I have amorphouse interstage tranny's from Tribute audio
the opt's are also amorpouse one's from the same builder.
The carractre of the tubes is the same now but no there is an naturalnes to the sound its smoother and more relaxed but still dynamic and very very clean.
I like the amp most with the c3g driver interstage coupled
its also a very simple set up.
Robert

Report message to a moderator

[Message index]

		SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 26 June 2006 12:25
		Re: SE 300B Project, Part 13 - The finished amp By: Wayne Parham on Mon, 26 June 2006 16:03
		Re: SE 300B Project, Part 13 - The finished amp By: Forty2wo on Sun, 02 July 2006 14:57
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 03 July 2006 06:08
		Re: SE 300B Project, Part 13 - The finished amp By: Forty2wo on Mon, 03 July 2006 17:01
		Re: SE 300B Project, Part 13 - The finished amp By: duderduderini on Thu, 01 November 2007 07:12
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Sun, 09 July 2006 13:26
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Mon, 10 July 2006 07:08
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Tue, 11 July 2006 09:23
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Tue, 11 July 2006 10:08
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Tue, 11 July 2006 10:37
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Tue, 11 July 2006 11:33
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Fri, 21 July 2006 04:19
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Fri, 21 July 2006 07:46
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Fri, 21 July 2006 08:38
		Re: SE 300B Project, Part 13 - The finished amp By: Wayne Parham on Fri, 21 July 2006 09:24
		Wow! :-) By: Damir on Fri, 21 July 2006 14:06
		Re: Wow! :-) By: horny on Sat, 22 July 2006 04:56
		Re: Wow! :-) By: Damir on Sun, 23 July 2006 07:14
		Re: Wow! :-) By: horny on Sat, 29 July 2006 03:59
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Sun, 13 August 2006 04:04
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Sun, 13 August 2006 16:00
		Re: SE 300B Project, Part 13 - The finished amp By: horny on Wed, 16 August 2006 14:43
		Re: SE 300B Project, Part 13 - The finished amp By: Damir on Thu, 17 August 2006 07:45
		Re: SE 300B Project, Part 13 - The finished amp By: red on Wed, 01 August 2007 06:24

Previous Topic:	Any new project ideas for winter?
Next Topic:	Spare me some IXP10M45S ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri May 23 17:26:24 CDT 2025