AudioRoundTable.com: Group Build » My next project: SE 811-10 from VTV, Issue 5

Home » Audio » Group Build » My next project: SE 811-10 from VTV, Issue 5

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

My next project: SE 811-10 from VTV, Issue 5 [message #31177]

Mon, 13 June 2005 19:11

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

I finally made up my mind what I'm going to build. The circuit looks about as easy as it gets. More details to follow.

Wayne, What are the issues of reproducing this schematic either in part or whole? I'd like to be able to show a schematic, but I do not want to violate any copyright laws......Colin

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31178 is a reply to message #31177]

Mon, 13 June 2005 20:12

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Colin; look on the article it should have a copyright express statement.

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31179 is a reply to message #31177]

Tue, 14 June 2005 05:20

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

I'll write Kittleson and see if he would allow the schematic to be posted here in reference to a Group Build project.

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31180 is a reply to message #31177]

Tue, 14 June 2005 20:17

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Colin, these amps run at a voltage close to 1,000 volts don't they? Just be careful choosing hookup wires to make sure the insulation's up to task. Ever seen electrical arcs in an amp?

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31181 is a reply to message #31180]

Tue, 14 June 2005 20:36

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

Yeah, They run pretty high. Thanks for the heads-up. Within the next couple of days, I'd like to get a discussion going about each part of the circuit, not only regarding function but parts selection and build techniques.

Are you familiar with this particular amp?

.....Colin

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31182 is a reply to message #31181]

Wed, 15 June 2005 05:59

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Not this particular one, but I was very intrigue by 811 amps over the winter and collected and studied several designs.

Report message to a moderator

Re: My next project: SE 811-10 from VTV, Issue 5 [message #31184 is a reply to message #31182]

Wed, 15 June 2005 07:08

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

I'm curious what intrigued you about this particular tube. Did you build one or go with another design? I really like the VTV design for its simplicity. Other than that I have no real thoughts or bias one way or the other....Colin

Report message to a moderator

Previous Topic:	Group build OTL?
Next Topic:	811 project - Caps and tubes ordered

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 03 12:33:53 CST 2024