AudioRoundTable.com: Group Build » Carbon comp vs carbon as grid stoppers

Home » Audio » Group Build » Carbon comp vs carbon as grid stoppers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Carbon comp vs carbon as grid stoppers [message #30888]

Wed, 09 March 2005 00:09

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

I still have a little noise in one channel, and I'm having a bitch of a time tracking it down. I used carbon film resistors as grid stoppers. I was looking back through some posts and it was recommend that carbon comps be used. Should I have used carbons comps in this application? If I used the wrong type of resistor, could this account for the noise?.....Colin

Report message to a moderator

[Message index]

		Carbon comp vs carbon as grid stoppers By: colinhester on Wed, 09 March 2005 00:09
		Re: Carbon comp vs carbon as grid stoppers By: PakProtector on Wed, 09 March 2005 04:34
		Re: Carbon comp vs carbon as grid stoppers By: Manualblock on Wed, 09 March 2005 08:08
		Noise By: colinhester on Wed, 09 March 2005 08:52
		Re: Noise By: GarMan on Wed, 09 March 2005 10:06
		Noise increases By: colinhester on Wed, 09 March 2005 10:43
		Re: Noise increases By: Wayne Parham on Wed, 09 March 2005 14:01
		Re: Noise increases By: GarMan on Thu, 10 March 2005 13:41
		Erector Set By: colinhester on Thu, 10 March 2005 14:45
		Re: Noise By: Forty2wo on Wed, 09 March 2005 13:58

Previous Topic:	progress
Next Topic:	troubleshooting continued.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Dec 12 09:31:57 CST 2024