Guinever underside [message #30756] |
Mon, 28 February 2005 18:28 ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
Forty2wo
Messages: 163 Registered: May 2009
|
Master |
|
|
![](http://img195.exs.cx/img195/180/guv9bo.jpg)
More cakepan chasie work. Cheep, easy to work and you get a cherry cobbler recipe to boot...John
|
|
|
I see now.... [message #30762 is a reply to message #30756] |
Mon, 28 February 2005 19:55 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
PakProtector
Messages: 935 Registered: May 2009
|
Illuminati (2nd Degree) |
|
|
You aren't using the second 5687. I suspect you're going to try 12B4 sooner or later aren't you? Good move IMO, but I would not throw a 5687 out ov bed either. The regulated linestage you heard in MD now has an RK34 amplifier valve. Two anode caps, mu of 13, and an 816-ish bottle. It looks quite cool. regards, Douglas
|
|
|
|
|
|
Re: Where's R1? [message #30772 is a reply to message #30768] |
Tue, 01 March 2005 08:28 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) |
Forty2wo
Messages: 163 Registered: May 2009
|
Master |
|
|
R1 is a grid stopper, on reflection I will probably add it. They are not strictly necessary but are good isurance against oscillation I left out R5, I think the amp will be sufficient load...John
|
|
|