AudioRoundTable.com: Group Build

Home » Audio » Group Build » CCS built

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: CCS built [message #30496 is a reply to message #30495]

Sun, 13 February 2005 00:17

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

I mounted the four DNs on four separate heatsinks that are attached to a single 4 x 6" PC board. I attached all resistors to the board as well. The DN are mounted such that each is perpendicular to one another. Also, the PC board with attached hardware will be mounted perpendicular to the chassis' top, thus minimizing the amount of space it takes up. I'll try to post pictures, right after I get my brand spanking new non-working Coolpix replaced.

I think it's a great idea to archive what has been done, both for the people currently working on it and future builders. There's some good info that gets quickly lost...Colin

Report message to a moderator

[Message index]

		CCS built By: colinhester on Sat, 12 February 2005 21:27
		Re: CCS built By: Wayne Parham on Sun, 13 February 2005 00:07
		Re: CCS built By: colinhester on Sun, 13 February 2005 00:17
		Re: CCS built By: Wayne Parham on Sun, 13 February 2005 00:36
		Re: CCS built By: Damir on Sun, 13 February 2005 09:10
		Re: CCS built By: colinhester on Sun, 13 February 2005 11:58
		Re: CCS built By: Damir on Sun, 13 February 2005 14:09
		Re: CCS built By: Manualblock on Sun, 13 February 2005 15:48
		CCS heatsinks By: PakProtector on Sun, 13 February 2005 13:08
		Re: CCS heatsinks By: colinhester on Sun, 13 February 2005 13:45
		Re: CCS heatsinks By: PakProtector on Sun, 13 February 2005 14:13
		Re: CCS heatsinks By: Manualblock on Sun, 13 February 2005 15:47
		Re: CCS heatsinks By: Damir on Sun, 13 February 2005 14:15

Previous Topic:	Forty2wo
Next Topic:	6v6v6

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 16 18:41:58 CDT 2025