Clear coat tip [message #29829] |
Thu, 09 November 2006 16:55 ![Go to next message Go to previous message](/forum/theme/AudioRoundTable/images/down.png) |
Burl
Messages: 2 Registered: May 2009
|
Esquire |
|
|
After using your stain/oil, and then your clearcoat, if you're like me its hard to keep out the fine bits of dust that ruin that glass-like finish. If you know someone who does auto painting, use a foam buffing pad with a low speed buffer and fine grit buffing compound to take out the dust nibs and make it shine. Just make sure the clearcoat has hardened about a week.
|
|
|