AudioRoundTable.com: Craftsmen » First routing experiences less than rousing

Home » Audio » Craftsmen » First routing experiences less than rousing

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re:Insert flap "A" and throw...... [message #29187 is a reply to message #29186]

Sun, 01 August 2004 16:37

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

....the Roto-zip away. Hopefully you bought it at the Depot as well.In which case you can return it and the accessories and get a 40 or 50 dollar Ryobi plunge router which will do all you need.
If not possible, hold on for dear life and make several passes that are maybe 1/4" of the rabbett at a time. Then make the finish pass and finally, go clockwise, known as a "climb cut" to finish the edges.
The Roto and Dremel tools are for making outlet cuts in drywall and thin sheet metal. Also OK for polishing and small grinding. Everything else is wishful thinking.

Report message to a moderator

[Message index]

		First routing experiences less than rousing By: lon on Sun, 01 August 2004 14:24
		Re:Insert flap "A" and throw...... By: BillEpstein on Sun, 01 August 2004 16:37
		Gee, they work so well in the ads.... By: wunhuanglo on Sun, 01 August 2004 20:55
		Re: Gee, they work so well in the ads.... By: lon on Sun, 01 August 2004 21:55
		Mine works fine By: Bill Fitzmaurice on Mon, 02 August 2004 13:59
		I learned some things Re: Mine works fine By: lon on Tue, 03 August 2004 15:05
		Re:Insert flap "A" and throw...... By: lon on Sun, 01 August 2004 21:50

Previous Topic:	Jasper Jig on Sale at PE
Next Topic:	Couple of Poly questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 07 18:16:14 CST 2024