AudioRoundTable.com: Craftsmen

Home » Audio » Craftsmen » Veneer finishing

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Ask the Other Bill [message #28878 is a reply to message #28877]

Fri, 19 December 2003 05:07

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

Martinelli is the lacquer guy, at least until OSHAA and the Rochester FD finds out what's going on in his basement. I like the Tung Oil/Linseed Oil stuff and lately have come back to Watco 'cause it's easier than 6 coat's of Waterlox. And, over MDF there is a certain unpredictability for oils, i.e., absorption.
Soooo, lacquer would be best.

Report message to a moderator

[Message index]

		Veneer finishing By: Adrian Mack on Fri, 19 December 2003 00:08
		Re: Ask the Other Bill By: BillEpstein on Fri, 19 December 2003 05:07
		I'm New at this but . . . By: elektratig on Fri, 19 December 2003 12:00
		Re: I'm New at this but . . . By: Adrian Mack on Sat, 20 December 2003 04:59
		Re: Veneer finishing By: Bill Martinelli on Fri, 19 December 2003 18:52
		Re: Tell, Tell! nt By: BillEpstein on Fri, 19 December 2003 20:54
		Re: Veneer finishing By: Adrian Mack on Sat, 20 December 2003 04:57
		Re: Veneer finishing By: billfort on Sat, 27 December 2003 20:23
		Re: Veneer finishing By: Adrian Mack on Sat, 27 December 2003 21:47

Previous Topic:	Lacquer Finish, a few ideas to get you started
Next Topic:	Cabinet finishing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 10:47:12 CST 2024