Eminence driver that can handle 1250 wattts RMS, with heat sink [message #28110] |
Thu, 20 October 2005 07:31 |
akhilesh
Messages: 1275 Registered: May 2009
|
Illuminati (3rd Degree) |
|
|
I saw this at parts express: Part Number 290-434 Sells for around $350 each. (Already has a heatsink in the front of the cone, I think). It's an 18 incher with 97 db eff that can do 1250 watts rms. Xmax: 9.8 mm. Wonder what would happen with 2 of these and a suitably modified 12 pi cabinet. Should get 135 db SPL continuous you think? -akhilesh
|
|
|
|
Re: Eminence driver that can handle 1250 wattts RMS, with heat sink [message #28114 is a reply to message #28110] |
Thu, 20 October 2005 08:38 |
Bill Wassilak
Messages: 402 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Wouldn't work to good, for one thing the horn cabinet would be massive, another thing it dosen't have the magnetic strength (BL) for good cone control in a long horn, the fs is to high so it would have trouble getting down to 30hz. The Qts is also a little high for horn loading, you want Qts to be like between .2-.4 preferably. It would probably be kick ass in a horn that was designed for 50hz though, but not 30. Try running some models in McBeans and see what you come up with. HTH Bill W.
|
|
|
|
|
|
|
|
|
|