Cleaning Old Contacts? [message #27808] |
Thu, 17 May 2007 07:29 ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
Ricardo
Messages: 91 Registered: May 2009
|
Viscount |
|
|
In the past, I cleaned some synthesizer key contacts with potentiometer cleaner and also alcohol. But now the contacts have sat without being played for a few years, and that doesn't seem to work as well. Do you have any suggestions for what I should try? Thanks.
|
|
|
|
Re: Cleaning Old Contacts? [message #27810 is a reply to message #27809] |
Fri, 18 May 2007 07:07 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
Ricardo
Messages: 91 Registered: May 2009
|
Viscount |
|
|
Thanks for the suggestions, Bill. The two keyboards in question have wire leads that I think are called "J hooks" that make contact with a common wire running the length of the keyboard. I assume I could get de-oxite at an electronics store that was a little more high end than The Source, or Radio Shack?
|
|
|
Re: Cleaning Old Contacts? [message #27811 is a reply to message #27810] |
Fri, 18 May 2007 11:28 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) |
Bill Wassilak
Messages: 402 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Yes I would go with the de-oxite, it's available from electronic supply stores, those sound like the pressure sensitive contacts to me. I don't think I'd use anything else on them but some sort of spray cleaner.
|
|
|