Home » Audio » Pro Sound » 3BX III Transistion Level Potentiometer
3BX III Transistion Level Potentiometer [message #27790] Sat, 06 January 2007 10:17 Go to next message
Reginald is currently offline  Reginald
Messages: 4
Registered: May 2009
Esquire
Does anyone know the manufacturer's part # for the 10K pot (I believe)that controls the Transition Level on the 3BX III Dynamic Range Expander?
Any info on this matter would greatly be appreciated.

Regards,
Reginald

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27791 is a reply to message #27790] Mon, 08 January 2007 20:39 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Is it oddly shaped? Would a generic potentiometer not work?

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27792 is a reply to message #27791] Tue, 09 January 2007 09:45 Go to previous messageGo to next message
Reginald is currently offline  Reginald
Messages: 4
Registered: May 2009
Esquire
It is not really oddly in shape, Radioshack has a generic one but slightly too big to fit on the board. Plus the knob is too long.
DBXPro was able to provide the name of the company (Musician Services Center) that brought out the old stock and manuals.
Hopefully, they have this item in stock.
Thanks for the reply.

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27793 is a reply to message #27792] Wed, 10 January 2007 01:10 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Many generic potentiometers have a very long shaft, around 2". Most people cut the shaft down to size with a hacksaw. This lets the part be useful for a variety of applications and panel thicknesses.

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27794 is a reply to message #27793] Wed, 10 January 2007 08:01 Go to previous messageGo to next message
Reginald is currently offline  Reginald
Messages: 4
Registered: May 2009
Esquire
Eventually, this is the route I will go if I can't find the maufacturer's part #.
Thanks again for the suggestion.

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27795 is a reply to message #27794] Thu, 11 January 2007 10:36 Go to previous messageGo to next message
Bill Wassilak is currently offline  Bill Wassilak
Messages: 402
Registered: May 2009
Illuminati (1st Degree)
Call DBX they have pretty good customer support, they should be able to help you out.

Report message to a moderator

Re: 3BX III Transistion Level Potentiometer [message #27796 is a reply to message #27795] Thu, 11 January 2007 14:09 Go to previous message
Reginald is currently offline  Reginald
Messages: 4
Registered: May 2009
Esquire
I have already contacted them, they no longer support this product
Their old stock of parts & manuals for the older DBX units were sold to a company call Musicians Service Center.
Contact info were provided, they also could not help since they do not have any info on the 3BX III.
Thanks anyway for the reply

Report message to a moderator

Previous Topic: Fender Bass amp sound fading out
Next Topic: Best Cab for Mesa Boogie Triple Recto
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Nov 26 19:34:13 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest