AudioRoundTable.com: Pro Sound » Sovtek Mig-100, wiring question.

Home » Audio » Pro Sound » Sovtek Mig-100, wiring question.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Sovtek Mig-100, wiring question. [message #27570 is a reply to message #27221]

Sun, 13 April 2008 13:16

tom
Messages: 12
Registered: May 2009

Chancellor

You can set up a full stack by using two 4x12 cabs. In my case, i use two orange 4x12's. They each have an impedence of 16 ohms. The two together give an impedence of 8 ohms so you connect the first cab to the 8 ohm input on the head. Then run the second 4 x 12 out of the first 4 x 12 through the second input/output (first cab out of the head - second cab out of the first cab) Your cabs must be wired parallel for this to work. Your guitar tech can do this for you.

Report message to a moderator

[Message index]

		Sovtek Mig-100, wiring question. By: Jasper Lin on Mon, 06 February 2006 20:45
		Re: Sovtek Mig-100, wiring question. By: Damir on Tue, 07 February 2006 07:25
		Re: Sovtek Mig-100, wiring question. By: tom on Sun, 13 April 2008 13:16

Previous Topic:	70's Tweed Twin Reverb ???
Next Topic:	Comp driver diaphragm material

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 16:59:28 CDT 2024