Sometimes when I play in Clean channel (channel 1) the amp cuts out and i have to give the amp a little smack for it to start working again. It only happens in channel 1. I have just replaced the power tubes and this problem still occurs.... could it be the preamp tubes or a short somewhere?
Wayne Parham Messages: 18792 Registered: January 2001
Illuminati (33rd Degree)
You might look for dirty tube sockets and cold solder joints. Use some electronics cleaner on the tube sockets and inspect the solder joints looking for a dull surface, pitting or cracks.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
