Home » Audio » General » Fisher 400
Fisher 400 [message #26272] Sat, 09 April 2005 20:26 Go to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
The fisher 400 has that voltage doubling circuit and uses 7868 tubes; yet it sounds pretty good; especially with vintage equipment and shines with KLH speakers. The 500c seems a little less open and seamless, but has a beguiling sound in the midbass that is hard to dislike. Bizzybee does something to the 400 that changes the circuit and makes it one of the best sounding vintage pieces. Anyone like these units?
It's nice to have a reciever of tube design in a second system. I will one day soon restore my 500 to try with Pi THeater 4's which should make a great combo since the Fisher rolls off slightly on the frequency extremes while the Pi 4's have a nice full range response that should compliment the 500c beautifully. I would love to hear of any experience with this set-up.

Re: Fisher 400 [message #26371 is a reply to message #26272] Thu, 18 August 2005 23:31 Go to previous message
Don is currently offline  Don
Messages: 9
Registered: May 2009
Esquire
I have had the 400X (rebuilt by BizzyBee) for about 3 years now and it's the best piece of gear I've owned. The FM tuner is about as good as it gets. I used it with the JD-100 CD player and for speakers I have a set of JBL L-36s. The mods include replacing the 7868s with EL34s, and 12AT7s in driver/phase inverters - lower gain than the original 12AX7s, but plenty for the EL34s.

Previous Topic: Wrongsideofthetracksaudiofest
Next Topic: Retard Question
Goto Forum:
  


Current Time: Sun Jul 14 04:44:26 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest