AudioRoundTable.com: Radio » 1946, 1947 RCA Model 65x1

Home » Audio » Radio » 1946, 1947 RCA Model 65x1

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

1946, 1947 RCA Model 65x1 [message #25796]

Wed, 01 March 2006 16:56

Naraka
Messages: 2
Registered: May 2009

Esquire

Hi, I own this old Radio 1946, 1947 RCA Model 65x1, have not used it in a long time, but would like to make er work again. Problem is can't find the Power Requirements, can anyone tell what voltage is required, i'd love to make er work again.

Report message to a moderator

Re: 1946, 1947 RCA Model 65x1 [message #25797 is a reply to message #25796]

Thu, 02 March 2006 08:47

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

If it's an American radio that was sold for use in the USA, it requires 110VAC. The power connector will be two thin blades.

Report message to a moderator

Re: 1946, 1947 RCA Model 65x1 [message #25798 is a reply to message #25796]

Fri, 03 March 2006 15:57

Naraka
Messages: 2
Registered: May 2009

Esquire

Hi, Wayne. Thanks for respondin', this one runs on a, dc battery, never had er plugged in, haven't used er for about 30 - 35 years, the batteries were about 6"long 2"wide & 3" high, just can't remer the voltage. I don't have er here it's at camp, i'll check for AC when i get there again.

Report message to a moderator

Previous Topic:	IF Transformer Woes
Next Topic:	sams on CD ROM

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 21:05:58 CST 2024