AudioRoundTable.com: General » Mitsubishi cd interface pin outs

Home » Audio » General » Mitsubishi cd interface pin outs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Mitsubishi cd interface pin outs [message #25330]

Mon, 23 August 2004 10:44

Larry Hackett
Messages: 3
Registered: May 2009

Esquire

I have a 2000 mitsu mirage with factory cd/cd changer control. do you know the pin-outs for the 13-pin round cd connector on the back of the head unit? Where could I get a mating connector to install an aftermarket cd player?
Thanks!

Report message to a moderator

Re: Mitsubishi cd interface pin outs [message #25331 is a reply to message #25330]

Mon, 23 August 2004 17:50

GoTunes
Messages: 4
Registered: May 2009

Esquire

You need a Scosche MI02 wiring harness. You can probably get it locally, otherwise check here.

Scosche MI02

Report message to a moderator

Re: Mitsubishi cd interface pin outs [message #25333 is a reply to message #25331]

Tue, 24 August 2004 07:01

Larry Hackett
Messages: 3
Registered: May 2009

Esquire

The Scosche MI02 is a speaker adapter. I need to connect to 13 pin round din CD/CD Changer port on the back of the factory (Matsushita) receiver/CD controller. Any help with where to get the correct 13 pin din plug and/or the pin outs for this connector would be greatly appreciated.

Report message to a moderator