Re: so I built these lines with a single tweeter [message #24145 is a reply to message #24141] |
Mon, 28 January 2008 11:43 |
|
I tuned to 100hz, four NSB per chamber [~1.5 cu. ft.}, 6" hole in the back as the port. The WinISD models shows a peak in upper midbass, I wanted this on purpose as I didn't expect much from the NSB's as I wanted higher SPL levels. It works well, the upper midbass is very strong - in room - and if it's too much, I can use the DCX EQ to tame it. I can also plug the rear port with a fancy piece of wood to make it a sealed box. I did this, but I liked the more aggressive sound with the port.
|
|
|