Home » Audio » Speaker » Small array for a small listening room. Help and advice needed.
Small array for a small listening room. Help and advice needed. [message #23445] Wed, 14 February 2007 03:59 Go to previous message
G is currently offline  G
Messages: 5
Registered: May 2009
Esquire
Hi all. I would like to build a small array type speaker using some Tang Band drivers and a single tweeter. I would like to use four 4" drivers and one tweeter per side. My listening room/area is only 12'x12' practically speaking. Also I have a nice little active sub so I only need to get down to 50Hz or so. Is this doable? I could go with six drivers per side if needed but I need a sensitivity of at least 95dB 1w/1m. The drivers I would like to use are here:

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=264-828

I haven't decided which tweeter to use yet. Any help or advice are appreciated.

Gavin

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Selah Audio XT-8 Review
Next Topic: ART array question
Goto Forum:
  


Current Time: Fri Nov 29 19:29:23 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest