AudioRoundTable.com: Speaker » Inspired by the McIntosh XRT2K

Home » Audio » Speaker » Inspired by the McIntosh XRT2K

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Inspired by the McIntosh XRT2K [message #23407 is a reply to message #23397]

Wed, 24 January 2007 16:26

auplater
Messages: 4
Registered: May 2009

Esquire

I dunno... I've had pretty good luck with the RD-75's (but paid less than half they're going rate)...
I only run them as enhanced midrange (see below)

http://www.audioroundtable.com/ArraySpeakers/messages/1281.html

AS such, there's virtually NO cross driver interference (limited only to horizontal plane), the planars are FAST, and the imaging is spectacular.

total cost per speaker was ~$700 US.

Report message to a moderator

[Message index]

		Inspired by the McIntosh XRT2K By: Attila on Tue, 23 January 2007 10:53
		Re: Inspired by the McIntosh XRT2K By: Marlboro on Tue, 23 January 2007 20:48
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 07:51
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 07:58
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 08:24
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 09:29
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 03:26
		Re: Inspired by the McIntosh XRT2K By: justinc on Thu, 25 January 2007 05:09
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 06:09
		Re: Inspired by the McIntosh XRT2K By: justinc on Thu, 25 January 2007 15:47
		Re: Inspired by the McIntosh XRT2K By: Attila on Fri, 26 January 2007 03:03
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Fri, 26 January 2007 10:01
		Re: Inspired by the McIntosh XRT2K By: Marlboro on Wed, 24 January 2007 17:43
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Tue, 23 January 2007 23:47
		Problems with the RD75? By: Marlboro on Wed, 24 January 2007 06:45
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 07:53
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 08:09
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Wed, 24 January 2007 10:00
		Re: Inspired by the McIntosh XRT2K By: auplater on Wed, 24 January 2007 16:26
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Wed, 24 January 2007 16:40
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 03:35
		Re: Inspired by the McIntosh XRT2K By: auplater on Thu, 25 January 2007 19:20
		Good link By: Renato on Tue, 30 January 2007 17:36

Previous Topic:	Needles a Great Success!
Next Topic:	Word document for cutting flange of Neo Tweeters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 06:06:32 CST 2024