AudioRoundTable.com: Speaker » Need a bit of help with cab volume

Home » Audio » Speaker » Need a bit of help with cab volume

Tue, 08 August 2006 21:18

Tom R.
Messages: 51
Registered: May 2009

Baron

Just out of curiosity, what volume will you calculate for a sealed enclosure with the following parameters?

Vas = 0.702 ft^3
fs = 44 Hz
Qts = .279
Qtc=.707

I calculated a volume of 0.13 ft^3

I used the online web site: http://www.lalena.com/audio/calculator/box/

Does your program come close? I am just about to start construction a quasi-array with 8 Focal 5-1/4" per side, and a single point source tweeter

Just checking….
Tom R

		Need a bit of help with cab volume By: djn on Tue, 08 August 2006 09:08
		Re: Need a bit of help with cab volume By: Jim Griffin on Tue, 08 August 2006 09:19
		Re: Need a bit of help with cab volume By: djn on Tue, 08 August 2006 12:29
		Re: Need a bit of help with cab volume By: Jim Griffin on Tue, 08 August 2006 15:39
		Re: Need a bit of help with cab volume By: djn on Tue, 08 August 2006 20:12
		Re: Need a bit of help with cab volume By: djn on Tue, 08 August 2006 20:14
		Re: Need a bit of help with cab volume By: Tom R. on Tue, 08 August 2006 21:18

Previous Topic:	Very puzzling
Next Topic:	Wanna' see somethin' pretty?

Goto Forum:

] [

]

Current Time: Wed Feb 26 10:53:28 CST 2025