AudioRoundTable.com: Speaker » Anyone here use the little .75 neo PE tweeter?

Home » Audio » Speaker » Anyone here use the little .75 neo PE tweeter?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Anyone here use the little .75 neo PE tweeter? [message #22621]

Fri, 06 May 2005 01:57

Mark D.
Messages: 2
Registered: May 2009

Esquire

Any good? What would be the best x-over point with the NSB's? Also, are there any Freq. Response graphs for the NSB on the web? Thank you.

Report message to a moderator

Re: Anyone here use the little .75 neo PE tweeter? [message #22622 is a reply to message #22621]

Fri, 06 May 2005 06:02

Jim Griffin
Messages: 232
Registered: May 2009

Master

I've heard the small P-E Neo tweeters and they are very good for the money. Of course can not cross them too low (suggest > 3000 Hz). Frequency response data (on almost all of the drivers that they sell) are available on the P-E site. Look up the part number and click for the response curves .pdf to view. Notice that the NSBs have major issues in the 5000-10000 range.

Report message to a moderator

Re: Anyone here use the little .75 neo PE tweeter? [message #22623 is a reply to message #22622]

Fri, 06 May 2005 12:28

Mark D.
Messages: 2
Registered: May 2009

Esquire

Thanks Jim. Those NSB's look ugly from 1,400hz right on up. But I think I may have found the answer to my future array project. Take a look at this little 3 incher and let me know what you think.
http://www.zaphaudio.com/audio-speaker18.html
I think with a little work I can get a very good x-over with the PE neo dome and this 3" driver. I'm going to buy a few examples of each driver recheck the T/S on the woofer tester 2 and run it through LspCAD.
I really didn't want to spend $9 per mid/woof and $4 per tweet but I have a good feeling about this combo.
For any real bass these of course will require sub(s)

Report message to a moderator

Previous Topic:	Acrylic transfer tape?
Next Topic:	Anyone familiar with Smith Horns?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 04 02:30:42 CST 2025