AudioRoundTable.com: Speaker » K1840 for consultation

Home » Audio » Speaker » K1840 for consultation

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: K1840 for consultation [message #22604 is a reply to message #22603]

Mon, 02 May 2005 09:18

Bill Wassilak
Messages: 402
Registered: May 2009

Illuminati (1st Degree)

With those speakers you have a cone break-up modes at 7khz you'll need to tame this down, so more than likely you will need a x-over and those tweeters. Also an array this size you will have to power taper it otherwise your going to get sound bloom as they call it from sitting to standing positions.
HTH
Bill W.

Report message to a moderator

[Message index]

		K1840 for consultation By: greenie512 on Sun, 01 May 2005 20:38
		Re: K1840 for consultation By: Bill Wassilak on Mon, 02 May 2005 09:18
		Re: K1840 for consultation By: greenie512 on Tue, 03 May 2005 07:41
		Re: K1840 for consultation By: Bill Wassilak on Tue, 03 May 2005 10:03
		Re: K1840 for consultation By: greenie512 on Tue, 03 May 2005 15:08
		Re: K1840 for consultation By: Bill Wassilak on Wed, 04 May 2005 08:19
		Re: K1840 for consultation By: Jim Griffin on Wed, 04 May 2005 08:52
		Re: K1840 for consultation By: Bill Wassilak on Wed, 04 May 2005 09:24
		Re: K1840 for consultation By: greenie512 on Wed, 04 May 2005 23:27
		Re: K1840 for consultation By: Jim Griffin on Thu, 05 May 2005 06:31
		Second thoughts? By: greenie512 on Wed, 04 May 2005 06:11
		Re: K1840 for consultation By: Anonymous on Tue, 03 May 2005 10:22
		Re: K1840 for consultation By: Anonymous on Tue, 03 May 2005 10:20

Previous Topic:	questions on Coral drivers
Next Topic:	Acrylic transfer tape?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Oct 11 23:20:20 CDT 2024