AudioRoundTable.com: Speaker » macintosh xrt 29

Home » Audio » Speaker » macintosh xrt 29

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: MacIntosh XRT 29 Comments [message #22574 is a reply to message #22572]

Sun, 03 April 2005 19:54

jdybnis
Messages: 8
Registered: May 2009

Esquire

Jim said:
You need to be shooting for a crossover in the low 2000's Hz(possible) or sub 2000 which the PT2 can not do. I have used the PT2 type planar as low as 2300 Hz (third order).

cmanning,
The higher the order of the filter is the lower you'll be able to cross. If Jim used a 3rd order at 2300Hz. You could certainly drop it to 2000Hz with a 4th order slope. Probably even lower if you wanted too.

Report message to a moderator

[Message index]

		macintosh xrt 29 By: mr hayes on Fri, 01 April 2005 15:55
		Re: macintosh xrt 29 By: cmanning on Sat, 02 April 2005 07:15
		Re: macintosh xrt 29 By: cmanning on Sat, 02 April 2005 07:19
		MacIntosh XRT 29 Comments By: Jim Griffin on Sun, 03 April 2005 12:15
		Re: MacIntosh XRT 29 Comments By: cmanning on Sun, 03 April 2005 14:55
		Re: MacIntosh XRT 29 Comments By: Jim Griffin on Sun, 03 April 2005 18:06
		Re: MacIntosh XRT 29 Comments By: cmanning on Sun, 03 April 2005 18:43
		Re: MacIntosh XRT 29 Comments By: cmanning on Sun, 03 April 2005 21:03
		Re: MacIntosh XRT 29 Comments By: jdybnis on Sun, 03 April 2005 19:54
		Re: macintosh xrt 29 By: Anonymous on Mon, 04 April 2005 12:49
		Re: macintosh xrt 29 By: cmanning on Mon, 04 April 2005 19:09

Previous Topic:	Confused about amp output, sensitivity and speaker SPL
Next Topic:	Altec 515B

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 08:22:11 CST 2024