AudioRoundTable.com: Speaker » The Zigmahornets

Home » Audio » Speaker » The Zigmahornets

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

The Zigmahornets [message #21864]

Thu, 11 October 2007 09:22

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

I completed these for John Prator (www.koolcables.com) just this morning, and they're playing in the smaller listening room. They use Dave Merrill's DCA4 full range drivers. They do the single driver thing very nicely, and the bass surprised me. I was anticipating a bright anemic sound, and it turns out they aren't overly bright at all, and the bass is OK. They are happier with a subwoofer, but for most music they will offer much enjoyment without bass reinforcement.

Here's the link to a picture of the raw mdf speakers:
http://fredt300b.smugmug.com/gallery/132721/3/206818126#206818126

Here's the link to a 6 Moons Audio review:
http://www.6moons.com/audioreviews/zigmahornet/zigmahornet.html

Report message to a moderator

Re: The Zigmahornets [message #21865 is a reply to message #21864]

Thu, 11 October 2007 14:58

Wayne Parham
Messages: 18788
Registered: January 2001

Illuminati (33rd Degree)

Very nice, Fred! Thanks for posting the links!

With that long of a line, I would expect bass to be decent. Are those little 4" drivers?

What kind of finish are you planning? Will they be veneered or painted? Or is John going to take them and have the finish applied himself?

http://www.6moons.com/audioreviews/zigmahornet/zigmahornet.html

http://fredt300b.smugmug.com/gallery/132721/3/206818126#206818126

Report message to a moderator

Re: The Zigmahornets [message #21866 is a reply to message #21865]

Thu, 11 October 2007 15:14

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

John will finish them. I have a fairly well equipped workshop and often volunteer to do the dumb part - pushing wood thru the table saw and gluing it all together. The cost to build these enclosures was about $30/pr. See them under construction at the link belwo.

Workshop

Report message to a moderator

Re: The Zigmahornets [message #21868 is a reply to message #21864]

Sun, 14 October 2007 05:18

akhilesh
Messages: 1275
Registered: May 2009

Illuminati (3rd Degree)

Nice, Fred! See if you can get the dca 5.5 drivers, which to my ears are totally ahead of the 4's! Interesting to see how the sound would change (my guess is much more upper bass and better highs).

-akhilesh

Report message to a moderator

Re: The Zigmahornets [message #21891 is a reply to message #21864]

Fri, 26 October 2007 12:56

norm
Messages: 1
Registered: May 2009

Esquire

would anyone have a copy of the plans for the zigma hornet that i, a woodworking buffon, can figure out simply? inches maybe? if so please e-mail it to nlongtin1@hotmail.com. thank you. n.l.

Report message to a moderator

Re: The Zigmahornets [message #21892 is a reply to message #21891]

Fri, 26 October 2007 16:28

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

See the link below.

Zigmahornet Plans

Report message to a moderator

Re: The Zigmahornets [message #21934 is a reply to message #21864]

Sat, 17 November 2007 21:31

mluckow
Messages: 1
Registered: May 2009

Esquire

I've started building a pair of Zigmahornets, but I just found out that the Merrill DCA4 drivers are sold out! So, now I'm in trouble! I also found out that the Fostex FE103E Sigma drivers are not longer being sold in Europe or Japan. And I heard that the Fostex FE103E drivers (not the Sigma version) aren't very good.

So, could someone please recommend another driver that might work instead?

Thank you very much!

Mike

Report message to a moderator