AudioRoundTable.com: Speaker » Why do we not include baffle height in BSC calculation?

Home » Audio » Speaker » Why do we not include baffle height in BSC calculation?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Why do we not include baffle height in BSC calculation? [message #21624]

Thu, 13 July 2006 13:53

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

In all the formulas I've seen for BSC values, only baffle width is considered? Shouldn't height and/or baffle area be part of the equation? For example, a speaker with a 8"x36" baffle would radiate lower at half space than a speaker with a 8"x12" baffle. Does this mean that if I take a 8"x36" speaker and turn it on its side, it requires a different BSC network because "width" changed from 8" to 36"?

Gar.

Report message to a moderator

[Message index]

		Why do we not include baffle height in BSC calculation? By: GarMan on Thu, 13 July 2006 13:53
		Re: Why do we not include baffle height in BSC calculation? By: Wayne Parham on Thu, 13 July 2006 14:35
		Re: Why do we not include baffle height in BSC calculation? By: Martin on Thu, 13 July 2006 17:38

Previous Topic:	Ultimate Line Array ($?)
Next Topic:	coaxial driver

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 17:43:09 CST 2024