AudioRoundTable.com: Speaker » Any ideas for a cabinet design?

Home » Audio » Speaker » Any ideas for a cabinet design?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Any ideas for a cabinet design? [message #20178 is a reply to message #20176]

Sun, 25 July 2004 19:29

Wayne Parham
Messages: 18738
Registered: January 2001

Illuminati (33rd Degree)

These will work well in a 0.5ft3 to 5.0ft3 cabinet port tuned to 45Hz. They're probably even better suited for a sealed box larger than 1.0ft3. As for the tweeter, you'll probably want to horn load it, and you'll want to obtain frequency response graphs of both the midwoofer and tweeter to decide on a crossover point and overall suitability.

Report message to a moderator

[Message index]

		Any ideas for a cabinet design? By: surlyfatrat on Sun, 25 July 2004 01:51
		Re: Any ideas for a cabinet design? By: Wayne Parham on Sun, 25 July 2004 04:09
		Re: Any ideas for a cabinet design? By: surlyfatrat on Sun, 25 July 2004 15:54
		Re: Any ideas for a cabinet design? By: Wayne Parham on Sun, 25 July 2004 19:29
		Re: Any ideas for a cabinet design? By: surlyfatrat on Sun, 25 July 2004 21:26
		Re: Any ideas for a cabinet design? By: Wayne Parham on Sun, 25 July 2004 21:56
		Re: Any ideas for a cabinet design? By: akhilesh on Mon, 26 July 2004 08:23
		Re: Any ideas for a cabinet design? By: surlyfatrat on Sun, 25 July 2004 16:08

Previous Topic:	pairing speakersw to tube amps
Next Topic:	choices, choices

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 11:19:01 CDT 2024