Home » Audio » Speaker » Pipe speaker update
Pipe speaker update [message #19826] Sun, 29 February 2004 02:28
lon is currently offline  lon
Messages: 760
Registered: May 2009
Illuminati (2nd Degree)

I fooled around with the pipe speakers a bit... got hooked
listening to things like the Pipe Dreams program (organ
recitals from all over) and space music like Tangerine Dream.


After trimming down the size to about 5 ft each, I spliced
another pipe length back in and now have one about 7-8 ft
tall. They still have just the Radio Shack 4in driver but
they look a bit whacked in the living room here. ;-)


Sound is way interesting though... not even any stuffing in
them. The most I ever put in was a light amount about half
the length to tame a bit of the echoey effect from voice
announcements.


But cosmetics is an issue with rascals like these:


My idea was to hang curtain material in panels in front
of each from the ceiling... some sort of track that can
hold curtain hooks. That material would be as sound neutral
as possible and try to be a close match with the window
draw-curtains (standard apartment variety.)


I wonder how these differ from the sonotube(tm)
setups where the open end is at the top rather
than the bottom (?)


They had a bit of a discussion in the Melhuish forum
about whether sound was affected by gravity. Terry Cain
became a bit colorful and poetic about it.


If the link is bad, go through homepage. James has changed
some things.


Previous Topic: Magneplanar 3.6
Next Topic: Next Audio-thon
Goto Forum:
  


Current Time: Mon Jun 10 22:37:19 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest