AudioRoundTable.com: Speaker » In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt

Home » Audio » Speaker » In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: lenth of port for your FE207E [message #19687 is a reply to message #19686]

Wed, 07 January 2004 10:58

DaveJ
Messages: 7
Registered: May 2009

Esquire

Hi akhilesh,
Thanks for the port length calculation. I've been switching back and forth between a 2.75" and 0.75" (no tube, just wood thickness). The 0.75" sounds a bit thin and the 2.75" slighly exagerates some notes, so 1.6" may be a good compromise. I have some extra port tubes at home, so I'll give it a try.

I should have the new baltic birch rear baffles mounted up this weekend. I'm curous as to the effect. Switching the front baffle from MDF to baltic birch was a step-up.

I will report back with results soon.

DaveJ

Report message to a moderator

[Message index]

		In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt By: akhilesh on Wed, 31 December 2003 10:13
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: JLM on Fri, 02 January 2004 05:33
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: akhilesh on Fri, 02 January 2004 10:37
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: jim denton on Mon, 05 January 2004 16:07
		Recommendations for Fostex FE206E driver By: akhilesh on Tue, 06 January 2004 14:13
		This also works for the FE207E driver By: DaveJ on Wed, 07 January 2004 05:52
		Re: This also works for the FE207E driver By: akhilesh on Wed, 07 January 2004 06:45
		Re: This also works for the FE207E driver By: DaveJ on Wed, 07 January 2004 07:06
		lenth of port for your FE207E By: akhilesh on Wed, 07 January 2004 09:59
		Re: lenth of port for your FE207E By: DaveJ on Wed, 07 January 2004 10:58
		Re: lenth of port for your FE207E By: IanJ on Sun, 01 February 2004 02:23
		Re: Recommendations for Fostex FE206E driver By: jim denton on Wed, 04 February 2004 12:37

Previous Topic:	new forum.............
Next Topic:	Hey guys...how about posting some pics of your speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 16:30:46 CST 2024