Home » Audio » Speaker » Ps 2002 vs BMS 4550
Re: Ps 2002 vs BMS 4550 [message #19324 is a reply to message #19322] Wed, 18 July 2007 15:21 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18789
Registered: January 2001
Illuminati (33rd Degree)

I like the Eminence PSD2002, myself. It has a titanium diaphragm and response is good to 16kHz. You might also like B&C drivers such as the DE250 (polyimide diaphragm), DE400 (polyimide diaphragm) or DE500 (titanium diaphragm). I'd say the DE250 is about equal to the PSD2002. It's a bit more expensive though, as are the other models. You could also look at TAD, but they're pricey. The TAD 2001 is a nice driver. It has a beryllium diaphragm, which is very rigid and has low moving mass. That makes it reach the top octave without going into breakup modes. You can actually reach 20kHz with this driver, and I don't know of any others that can. Then again, it costs a thousand bucks. Best to pick that one up used.


 
Read Message
Read Message
Read Message
Read Message
Previous Topic: Baltic Finishes
Next Topic: Wayne, does Speakerworks use JBL cones for repair?
Goto Forum:
  


Current Time: Thu Nov 28 01:47:19 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest