AudioRoundTable.com: Speaker » Conical HF Horn?

Home » Audio » Speaker » Conical HF Horn?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Conical HF Horn? [message #19301 is a reply to message #19300]

Mon, 18 June 2007 19:46

Cuppa Joe
Messages: 103
Registered: May 2009

Viscount

I've read something of the sort concerning the old EV Mantaray stadium horns. Intuition tells me that the dense vertical interference will help mask the apparent apex difference. (Yes? Maybe?)

The singular task of finding just the right HF horn for this project has taken at least 4 times longer than it took to design the midrange horn! A pair has to fit exactly across the mouth in the vertical, they can't be too wide or too panel-like, they must be constant directivity, 90 degrees, and have a cutoff between 1.5kHz and 2kHz. I've even considered using a bi-radial horn sideways with a deflector to correct for upper-range dispersion!

Report message to a moderator

Re: Conical HF Horn? [message #19302 is a reply to message #19301]

Mon, 18 June 2007 20:46

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

You'll be OK is you just array vertically. To tell the truth, at the frequency range where the dispersion slot works, you'd have more problems with center-to-center spacing than astigmatism. But I would suggest against splaying horns like this horizontally and grouping them as a vertical array also. Don't do two rows.

Report message to a moderator

Re: Conical HF Horn? [message #19303 is a reply to message #19302]

Mon, 18 June 2007 21:35

Cuppa Joe
Messages: 103
Registered: May 2009

Viscount

Right! I'm avoiding the classic cluster array for all of my designs. Either they're vertical only, or they're horizontal (arced) only, but they're never both at the same time! For 2 of the 3 horizontal designs, I'm relying upon a high-quality, large format HF horn for segregation purposes, just the opposite of the HF section in the line array.

Report message to a moderator

Re: Conical HF Horn? [message #19338 is a reply to message #19303]

Fri, 27 July 2007 16:00

DMoore
Messages: 58
Registered: May 2009
Location: Seattle

Baron

I don't remember EXACTLY where I read this, but I did somewhere that a conical horn does not have an Fc (low frequency cutoff) as we commonly know it. I don't know whether that means that it doesn't fall off at all, or that it is unpredicable where it falls off...

Dana

Report message to a moderator

Pages (2): [ « ‹ 1 2]

Previous Topic:	JBL G-730 Diaphragm quest
Next Topic:	passive crossover point

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 10:13:54 CST 2024