AudioRoundTable.com: Speaker » 1:1 throat area

Home » Audio » Speaker » 1:1 throat area

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 1:1 throat area [message #19120 is a reply to message #19118]

Thu, 22 February 2007 21:28

Cuppa Joe
Messages: 103
Registered: May 2009

Viscount

I'm thinking that the transition should be either as short as possible, or very gradual if it must be longer. The first idea was small strips of solid wood with triangular cuts, assembled like a picture frame. Not sure what to do aout the corners, if anything. Maybe the frame could include a phase plug? (I'd rather not muck about with phase plugs...!) I just want to discourage reflections off the baffle/throat panel.

Report message to a moderator

[Message index]

		1:1 throat area By: DMoore on Tue, 20 February 2007 15:20
		Re: 1:1 throat area By: DMoore on Tue, 20 February 2007 15:21
		Re: 1:1 throat area By: Cuppa Joe on Tue, 20 February 2007 23:01
		Re: 1:1 throat area By: Wayne Parham on Wed, 21 February 2007 09:48
		Re: 1:1 throat area By: DMoore on Wed, 21 February 2007 14:26
		Re: 1:1 throat area By: Wayne Parham on Wed, 21 February 2007 20:47
		Re: 1:1 throat area By: Cuppa Joe on Wed, 21 February 2007 22:24
		Re: 1:1 throat area By: Wayne Parham on Thu, 22 February 2007 10:04
		Re: 1:1 throat area By: DMoore on Thu, 22 February 2007 11:28
		Re: 1:1 throat area By: Wayne Parham on Thu, 22 February 2007 11:49
		Re: 1:1 throat area By: Cuppa Joe on Thu, 22 February 2007 21:28
		Re: 1:1 throat area By: swett on Fri, 23 February 2007 14:56
		Re: 1:1 throat area By: Cuppa Joe on Fri, 23 February 2007 22:19
		Re: 1:1 throat area By: Wayne Parham on Mon, 26 February 2007 18:41
		Re: 1:1 throat area By: swett on Tue, 27 February 2007 11:44
		Conical midhorns with 6" and 8" drivers By: Wayne Parham on Tue, 27 February 2007 12:54
		Re: Conical midhorns with 6" and 8" drivers By: Cuppa Joe on Wed, 28 February 2007 21:47
		Re: Conical midhorns with 6" and 8" drivers By: Wayne Parham on Wed, 28 February 2007 23:27
		Re: Conical midhorns with 6" and 8" drivers By: Cuppa Joe on Thu, 01 March 2007 20:52
		Re: Conical midhorns with 6" and 8" drivers By: Wayne Parham on Thu, 01 March 2007 21:38
		Re: 8PE21 Horn By: swett on Mon, 05 March 2007 00:52

Previous Topic:	comb filter distorsion
Next Topic:	Adding Tweeter to Full Range Driver

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 01:08:25 CST 2024