AudioRoundTable.com: Speaker » 1:1 throat area

Home » Audio » Speaker » 1:1 throat area

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 1:1 throat area [message #19109 is a reply to message #19108]

Tue, 20 February 2007 23:01

Cuppa Joe
Messages: 103
Registered: May 2009

Viscount

I'm considering a 10" driver (again) for this application, as opposed to a 12" as used in the MSL-4. I'd also consider a pair of stacked 8" drivers (for power handling) if necessary, to get a longer horn for the mouth size. It's all just a clump of ideas for now!

Report message to a moderator

[Message index]

		1:1 throat area By: DMoore on Tue, 20 February 2007 15:20
		Re: 1:1 throat area By: DMoore on Tue, 20 February 2007 15:21
		Re: 1:1 throat area By: Cuppa Joe on Tue, 20 February 2007 23:01
		Re: 1:1 throat area By: Wayne Parham on Wed, 21 February 2007 09:48
		Re: 1:1 throat area By: DMoore on Wed, 21 February 2007 14:26
		Re: 1:1 throat area By: Wayne Parham on Wed, 21 February 2007 20:47
		Re: 1:1 throat area By: Cuppa Joe on Wed, 21 February 2007 22:24
		Re: 1:1 throat area By: Wayne Parham on Thu, 22 February 2007 10:04
		Re: 1:1 throat area By: DMoore on Thu, 22 February 2007 11:28
		Re: 1:1 throat area By: Wayne Parham on Thu, 22 February 2007 11:49
		Re: 1:1 throat area By: Cuppa Joe on Thu, 22 February 2007 21:28
		Re: 1:1 throat area By: swett on Fri, 23 February 2007 14:56
		Re: 1:1 throat area By: Cuppa Joe on Fri, 23 February 2007 22:19
		Re: 1:1 throat area By: Wayne Parham on Mon, 26 February 2007 18:41
		Re: 1:1 throat area By: swett on Tue, 27 February 2007 11:44
		Conical midhorns with 6" and 8" drivers By: Wayne Parham on Tue, 27 February 2007 12:54
		Re: Conical midhorns with 6" and 8" drivers By: Cuppa Joe on Wed, 28 February 2007 21:47
		Re: Conical midhorns with 6" and 8" drivers By: Wayne Parham on Wed, 28 February 2007 23:27
		Re: Conical midhorns with 6" and 8" drivers By: Cuppa Joe on Thu, 01 March 2007 20:52
		Re: Conical midhorns with 6" and 8" drivers By: Wayne Parham on Thu, 01 March 2007 21:38
		Re: 8PE21 Horn By: swett on Mon, 05 March 2007 00:52

Previous Topic:	comb filter distorsion
Next Topic:	Adding Tweeter to Full Range Driver

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 08 11:01:15 CDT 2024