AudioRoundTable.com: Speaker » Mounting an 811 horn

Home » Audio » Speaker » Mounting an 811 horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Mounting an 811 horn [message #18758]

Mon, 05 June 2006 16:39

SteveBrown
Messages: 330
Registered: May 2009

Grand Master

Is it preferred to mount this horn to a baffle from the front of the baffle, or the back? The baffle is 3/4" thick. Thanks!

Report message to a moderator

Re: Mounting an 811 horn [message #18759 is a reply to message #18758]

Mon, 05 June 2006 18:08

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Although mounting from the rear is devine, "cowgirl" has it's good points, too.

Mounting

Report message to a moderator

Re: Mounting an 811 horn [message #18760 is a reply to message #18759]

Mon, 05 June 2006 22:11

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Report message to a moderator

Re: Mounting an 811 horn [message #18761 is a reply to message #18758]

Mon, 05 June 2006 22:14

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

If baffle mounting, it's best if you can make the mouth flush. A smooth transition is what you want with no abrupt changes. Also, baffle mounting makes the horn radiate into halfspace (as opposed to full-space) if the baffle is large enough. The 811 is large enough that it really doesn't need it if the crossover point is above 800Hz. But you can't ever be too smooth.