AudioRoundTable.com: Speaker » And now for something completely different ......

Home » Audio » Speaker » And now for something completely different ......

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: LF driver [message #18514 is a reply to message #18507]

Mon, 30 January 2006 10:46

Martin
Messages: 220
Registered: May 2009

Master

One of my design goals was to put the Lowthers at ear level, or very close, so this dictated part of the FR-W-W (full range-woofer-woofer) arrangement. The Lowther plays from 100Hz to 200 Hz and up depending on the xover frequency setting selected. At these low frequencies, I did not calculate any significant interference pattern from the crossover between the woofers and the Lowther. So I guess I am not sure what I would gain from a W-FR-W alignment of the drivers. I can see an even bigger baffle for a W-FR-W if I maintained the height position of the Lowther.

Martin

Report message to a moderator

[Message index]

		And now for something completely different ...... By: Martin on Sat, 28 January 2006 09:53
		Cool! By: Wayne Parham on Sat, 28 January 2006 10:20
		Re: Cool! By: Martin on Sat, 28 January 2006 10:28
		Re: Cool! By: Wayne Parham on Sat, 28 January 2006 10:39
		Re: And now for something completely different ...... By: Manualblock on Sat, 28 January 2006 11:06
		Re: And now for something completely different ...... By: akhilesh on Sat, 28 January 2006 14:56
		Re: And now for something completely different ...... By: Martin on Sun, 29 January 2006 05:48
		Re: And now for something completely different ...... By: akhilesh on Sun, 29 January 2006 21:54
		Re: And now for something completely different ...... By: Martin on Mon, 30 January 2006 10:53
		LF driver By: colinhester on Sun, 29 January 2006 12:10
		Re: LF driver By: Martin on Sun, 29 January 2006 17:50
		Re: LF driver By: colinhester on Sun, 29 January 2006 19:35
		Re:Also look at these drivers By: Bill Epstein on Mon, 30 January 2006 05:40
		Re:Also look at these drivers By: Martin on Mon, 30 January 2006 10:48
		50Hz - 200Hz By: Wayne Parham on Mon, 30 January 2006 11:32
		Re: 50Hz - 200Hz By: Martin on Mon, 30 January 2006 17:47
		Re: 50Hz - 200Hz By: Wayne Parham on Mon, 30 January 2006 17:50
		Re: 50Hz - 200Hz By: Martin on Mon, 30 January 2006 19:20
		Re: 50Hz - 200Hz By: Wayne Parham on Mon, 30 January 2006 20:38
		Push-pull for pneumatic symmetry at VLF By: Wayne Parham on Mon, 30 January 2006 22:55
		Re: Push-pull for pneumatic symmetry at VLF By: Floyd Andrews on Tue, 31 January 2006 10:51
		Re: Push-pull for pneumatic symmetry at VLF By: Wayne Parham on Tue, 31 January 2006 12:42
		Re: LF driver By: Martin on Mon, 30 January 2006 10:46
		Re:"...2 down and one to go, Dorothy Kilgallen..." By: Bill Epstein on Mon, 30 January 2006 05:57
		Re:"...2 down and one to go, Dorothy Kilgallen..." By: Martin on Mon, 30 January 2006 10:50
		Re:"...2 down and one to go, Dorothy Kilgallen..." By: MWG on Tue, 31 January 2006 22:14
		Re:Monty Python! By: Manualblock on Mon, 30 January 2006 11:47
		Re:Monty Python! By: Wayne Parham on Mon, 30 January 2006 12:35
		Re:Monty Python! By: Manualblock on Mon, 30 January 2006 16:01
		Re:Monty Python! By: Wayne Parham on Mon, 30 January 2006 17:59
		Re:Monty Python! By: Manualblock on Tue, 31 January 2006 07:09
		Re:Monty Python! By: Wayne Parham on Tue, 31 January 2006 08:49
		Re:Monty Python! By: Manualblock on Tue, 31 January 2006 11:31
		Re: And now for something completely different ...... By: footstony on Mon, 30 January 2006 18:44
		Re: And now for something completely different ...... By: Martin on Mon, 30 January 2006 19:18
		Re: And now for something completely different ...... By: footstony on Mon, 30 January 2006 22:15
		Re: And now for something completely different ...... By: shayne yasinski on Tue, 31 January 2006 23:03

Previous Topic:	Vintage speakers vs. modern
Next Topic:	magnets

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 16 09:32:11 CST 2024