AudioRoundTable.com: Speaker » Checking with meter

Home » Audio » Speaker » Checking with meter

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Checking with meter [message #17765 is a reply to message #17762]

Tue, 26 April 2005 03:39

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

When you measure with a meter, what you see is DC resistance and that's only part of impedance. The other part is voice coil reactance, and that won't show up on a meter. Typical DC resistance value for an 8 ohm driver is 4-6 ohms, for a 16 ohm driver it's usually 8-12 ohms. Some are a little higher or lower.

Report message to a moderator

[Message index]

		Checking with meter By: adavis464 on Mon, 25 April 2005 18:11
		Re: maybe By: tomt on Mon, 25 April 2005 21:10
		They are marked jbl 2440 16 ohm By: adavis464 on Tue, 26 April 2005 10:32
		Re: Checking with meter By: Wayne Parham on Tue, 26 April 2005 03:39
		For example... By: GarMan on Tue, 26 April 2005 10:51

Previous Topic:	neat trick for corners in rear horns, xmission lines
Next Topic:	I need help in the creation of a midbass horn...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 14 14:47:07 CDT 2024