AudioRoundTable.com: Speaker » Measuring sensitivity

Home » Audio » Speaker » Measuring sensitivity

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Measuring sensitivity [message #17636 is a reply to message #17634]

Mon, 07 March 2005 06:30

JLapaire
Messages: 156
Registered: May 2009

Master

Hi Dave, I've had a bunch of projects scurry through the shop this winter. The big one was working with FreddyI's design for a Karlson slightly smaller than mine, but with an 18" instead of 15" driver. I shipped the test mule to him, so won't have it for the Do, but might modify mine with the knowledge gained. I'll start Shane's K15s this month; they'll definitely have the mods which should produce very slightly deeper base and an audible improvement in midbass and lower mid tonal accuracy.

How 'bout you Dave - cookin' anything up to spring on us?

Report message to a moderator

[Message index]

		Measuring sensitivity By: JLapaire on Thu, 03 March 2005 12:37
		going way out on a limb here... By: wunhuanglo on Thu, 03 March 2005 16:44
		Re: going way out on a limb here... By: footstony on Thu, 03 March 2005 19:03
		Re: going way out on a limb here... By: Bill Fitzmaurice on Thu, 03 March 2005 20:13
		Re: going way out on a limb here... By: JLapaire on Mon, 07 March 2005 05:57
		Re: going way out on a limb here... By: Wayne Parham on Mon, 07 March 2005 21:11
		Reference distance By: JLapaire on Tue, 08 March 2005 05:59
		Re: Reference distance By: Bill Fitzmaurice on Tue, 08 March 2005 13:12
		Re: Measuring sensitivity By: DRC on Sun, 06 March 2005 15:59
		Re: Measuring sensitivity By: JLapaire on Mon, 07 March 2005 06:30
		Re: Measuring sensitivity By: DRC on Mon, 07 March 2005 07:08

Previous Topic:	SET Friendly Arrays???
Next Topic:	Volume dropping/bsc filtering

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 13 14:12:03 CDT 2024