heard a new prototype [message #17370] |
Sat, 15 January 2005 09:02 |
hurdy_gurdyman
Messages: 416 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
It's been an interesting day. Darrel (Ro-Blower on the Decware Forum) brought his new prototype open baffle speakers over today. These are a very retro looking speaker that is definately not your run of the mill speaker. They are actually quite cool looking. Here's some pics. http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=/e49 1 The bass goes somewhat deeper then my own EV open baffles (with my subs off). Theye are down about 4.5 dB at 50Hz. Bass was clean with a natural, uncolored sound, with that certain boxless quality that OB's do so well. The mids were a nice, not overly forward sound that one could listen to all day without listener fatique (we did listen for a good part of the day). The highs were clear and matched the rest of the sound nicely. They had the big soundstage that all OB's seem to have. These speakers are very efficient at about 100dB sensitivity. Drivers used are 15" Eminence Alpha and Pyle bullet tweeter. For those interested, here's a thread on the Decware forum with more details. http://www.decware.com/cgi-bin/yabb/YaBB.cgi?board=General&action=display&num=1105751652 All in all, I had a fun day listening to these. Dave
|
|
|
Re: heard a new prototype [message #17373 is a reply to message #17370] |
Sat, 15 January 2005 09:26 |
|
Wayne Parham
Messages: 18787 Registered: January 2001
|
Illuminati (33rd Degree) |
|
|
Hi Dave, Sounds interesting. Alpha 15's have real high Q, so I'll bet they sound good on those open baffles. I couldn't access the pictures from the link though, so I couldn't see 'em. Yahoo photos was asking me to sign in to view. Maybe you can set them to be public? Wayne
|
|
|
Re: heard a new prototype [message #17375 is a reply to message #17373] |
Sat, 15 January 2005 09:40 |
hurdy_gurdyman
Messages: 416 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Wayne, Try this. http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=e491&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/the_hurdy_gurdyman/my_photos I think I should have signed out before copying the link. Dave
|
|
|
Re: heard a new prototype [message #17376 is a reply to message #17370] |
Sat, 15 January 2005 09:41 |
hurdy_gurdyman
Messages: 416 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
If the link to the Mini Planers didn't work, try this. http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=e491&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/the_hurdy_gurdyman/my_photos
|
|
|
|
|
Re: heard a new prototype [message #17380 is a reply to message #17378] |
Sat, 15 January 2005 10:43 |
hurdy_gurdyman
Messages: 416 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Wayne, The tweeter is a Pyle pro bullet tweeter. The builder and designer of these nice OB's is Darrel Hawthorne, a regular over at the Decware Forum. Here's a thread that I started there. http://www.decware.com/cgi-bin/yabb/YaBB.cgi?board=General&action=display&num=1105751652 Dave
|
|
|
|
|
Re: heard a new prototype [message #17383 is a reply to message #17381] |
Sat, 15 January 2005 11:06 |
Ro_Blower
Messages: 14 Registered: May 2009
|
Chancellor |
|
|
Hey Wayne. Here is the spec. on that tweeter: Partsexpress #272-115 pdbt28 correction* 104 db.sen The assemble is all wrapped up (foam /felt) but if memory serves me it came with 3.3uf cap. I ran thru several tweeters and stoped with this one as it had the least compromises/ most potential in the price range I wanted . Thanks again for the nice words Wayne Darrel
|
|
|