Home » Audio » Speaker » heard a new prototype
heard a new prototype [message #17370] Sat, 15 January 2005 09:02 Go to next message
hurdy_gurdyman is currently offline  hurdy_gurdyman
Messages: 416
Registered: May 2009
Illuminati (1st Degree)
It's been an interesting day. Darrel (Ro-Blower on the Decware Forum) brought his new prototype open baffle speakers over today. These are a very retro looking speaker that is definately not your run of the mill speaker. They are actually quite cool looking. Here's some pics.

http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=/e49 1

The bass goes somewhat deeper then my own EV open baffles (with my subs off). Theye are down about 4.5 dB at 50Hz. Bass was clean with a natural, uncolored sound, with that certain boxless quality that OB's do so well. The mids were a nice, not overly forward sound that one could listen to all day without listener fatique (we did listen for a good part of the day). The highs were clear and matched the rest of the sound nicely. They had the big soundstage that all OB's seem to have. These speakers are very efficient at about 100dB sensitivity. Drivers used are 15" Eminence Alpha and Pyle bullet tweeter.
For those interested, here's a thread on the Decware forum with more details.

http://www.decware.com/cgi-bin/yabb/YaBB.cgi?board=General&action=display&num=1105751652

All in all, I had a fun day listening to these.

Dave



Re: heard a new prototype [message #17373 is a reply to message #17370] Sat, 15 January 2005 09:26 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)
Hi Dave,

Sounds interesting. Alpha 15's have real high Q, so I'll bet they sound good on those open baffles. I couldn't access the pictures from the link though, so I couldn't see 'em. Yahoo photos was asking me to sign in to view. Maybe you can set them to be public?

Wayne

Re: heard a new prototype [message #17375 is a reply to message #17373] Sat, 15 January 2005 09:40 Go to previous messageGo to next message
hurdy_gurdyman is currently offline  hurdy_gurdyman
Messages: 416
Registered: May 2009
Illuminati (1st Degree)
Wayne,

Try this.

http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=e491&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/the_hurdy_gurdyman/my_photos

I think I should have signed out before copying the link.

Dave


Re: heard a new prototype [message #17376 is a reply to message #17370] Sat, 15 January 2005 09:41 Go to previous messageGo to next message
hurdy_gurdyman is currently offline  hurdy_gurdyman
Messages: 416
Registered: May 2009
Illuminati (1st Degree)
If the link to the Mini Planers didn't work, try this.

http://pg.photos.yahoo.com/ph/the_hurdy_gurdyman/album?.dir=e491&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/the_hurdy_gurdyman/my_photos


Re: heard a new prototype [message #17378 is a reply to message #17375] Sat, 15 January 2005 10:11 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)
That did it! Wow! Those are super cool looking! What tweeter is that? What crossover did you use?



Re: heard a new prototype [message #17379 is a reply to message #17378] Sat, 15 January 2005 10:41 Go to previous messageGo to next message
Ro_Blower is currently offline  Ro_Blower
Messages: 14
Registered: May 2009
Chancellor
Hey Wayne,
Thankyou so very much for the compliments!
The tweeter is made by Pyle pro ,
I used only the cap. that came with it as the cross from mid to high.
Also run an L-pad to help balance the 106 db sen. of the tweeter to the approx. 98 of the Eminence 15"er. Also doped and tweeked the 15 and foam /felt wrapped the rear of the tweeter. Sort of turned this coaxialy mounted tweeter assembly in a pseudo phase plug of sorts.Seems to do the job. This speaker has been designed to serve as an intro level audiophile speaker for budget conscious music lover.
I have gone over more construction detaild on th Decware forum.
Thanks again
Darrel

Re: heard a new prototype [message #17380 is a reply to message #17378] Sat, 15 January 2005 10:43 Go to previous messageGo to next message
hurdy_gurdyman is currently offline  hurdy_gurdyman
Messages: 416
Registered: May 2009
Illuminati (1st Degree)
Wayne,

The tweeter is a Pyle pro bullet tweeter. The builder and designer of these nice OB's is Darrel Hawthorne, a regular over at the Decware Forum. Here's a thread that I started there.

http://www.decware.com/cgi-bin/yabb/YaBB.cgi?board=General&action=display&num=1105751652

Dave


Re: heard a new prototype [message #17381 is a reply to message #17379] Sat, 15 January 2005 10:50 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)
Hi Darrel,

Sounds really neat! What size capacitor comes with the tweeter?

Wayne



Re: heard a new prototype [message #17382 is a reply to message #17380] Sat, 15 January 2005 10:51 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)
Way cool Dave! I like!

Re: heard a new prototype [message #17383 is a reply to message #17381] Sat, 15 January 2005 11:06 Go to previous messageGo to previous message
Ro_Blower is currently offline  Ro_Blower
Messages: 14
Registered: May 2009
Chancellor
Hey Wayne.

Here is the spec. on that tweeter:
Partsexpress #272-115
pdbt28
correction* 104 db.sen
The assemble is all wrapped up (foam /felt)
but if memory serves me it came with 3.3uf cap.
I ran thru several tweeters and stoped with this one as it had the least compromises/ most potential in the price range I wanted .
Thanks again for the nice words Wayne
Darrel

Previous Topic: Power tapering Idea - Mass loading ?
Next Topic: Readers in the EU
Goto Forum:
  


Current Time: Sat Nov 23 04:33:26 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest