AudioRoundTable.com: Speaker » Ferguson Hill

Home » Audio » Speaker » Ferguson Hill - Clear Horns

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Ferguson Hill - Clear Horns [message #17075]

Wed, 13 October 2004 13:19

Greg Lytte
Messages: 1
Registered: May 2009

Esquire

Have any of you listened to these speakers? Is there a place to demo them in the US?
It is a very large and pretty bell. How do they keep the bell from ringing without bracing of any kind?

http://www.fergusonhill.co.uk

Report message to a moderator

Re: Ferguson Hill - Clear Horns [message #17078 is a reply to message #17075]

Thu, 14 October 2004 07:02

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

The 'bell' doesn't ring because there isn't anybody whacking it with a hammer. This shape is particularly resistant to mechanical vibration, and requires no bracing because there is no rear chamber behind it which could serve as a source of frequencies that could vibrate the structure. This rig is functionally identical to a small horn-loaded tweeter, just a lot bigger.

Your concern falls into the same category as the persistent myth about metallic radiating surfaces, cone or dome or whatever, having a 'metallic' sound. They don't, because again they aren't being struck with anything, they are simply moving back and forth as pistons.

I haven't heard these but they do look nice.

Report message to a moderator

That really doesn't seem to hold water [message #17079 is a reply to message #17078]

Thu, 14 October 2004 17:55

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

A bell "rings" as it vibrates at its fundamental resonance. The clear bell, or any horn, is quite capable of having its first resonance excited by the acoustic wave it is conducting.

Describing it as "metallic" may be inaccurate, or reflect a prejudice, but the resonance can certainly exist.

Report message to a moderator

Re: That really doesn't seem to hold water [message #17080 is a reply to message #17079]

Fri, 15 October 2004 06:37

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

Of course, and it is required that the natural resonance modes of the structure not be excited by program material to the point that they are audible. But that caveat applies to any enclosure, irrespective of shape or design. If anything the shape of this or any bell is less likely to have serious peaked resonant modes than a structure with flat surfaces.

Report message to a moderator

Previous Topic:	need plans in "inches" for Lowther DX-3 back horn cabinets
Next Topic:	List of popular speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 02:27:59 CST 2024