Hi all

So i was thinking-i have a 2226 on ported box(33hz 175L) ,and adrian mentioned to me that it has a similar response to the lab12 on a larger horn,so why buy a woofer when the existing one works.

240watts=130db spl with 2226 on 490L 30hz horn

this way
-i can add more or less volume easily ontop,independant of horn length
-i can inspect woofer/replace
-ease of construction

(btw im selling my car so its no use designing a small labhorn for it)

And with such a big enclosure, don't forget about bracing...
In fact it doesn't seem big at all if I compare against my 2k litter space :)

I better add the mouth brace in on mine now :P

I'll make three basshorns, one for my 18LW1400, and one each for my pair of 2225's :P haha. Nawww.... the 2225's stay in the towers.

If you don't mind, what does the input dialog look like? (throat, width, etc...?)

someday il get SW and mic and measure the distortion ,see what i get. i think that the wm-60 will provide something of a measurement anyway.

WHen i have a measurement system setup,il have a fit of measurements-tv speaker,pc speakers,car,home,jbl 15",digitor horn :p

What il do-see about a flat first! -i may not have room for a corner horn if my room is 2x4m :-) then i may only have room for a 12" in 3cubes :-S

then make a choice after that :-)

Cheers!

And with such a big enclosure, don't forget about bracing...
In fact it doesn't seem big at all if I compare against my 2k litter space :)