AudioRoundTable.com: Speaker » What is the throat dimension of the Altec A7 horn?

Home » Audio » Speaker » What is the throat dimension of the Altec A7 horn?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

What is the throat dimension of the Altec A7 horn? [message #16243]

Sat, 20 March 2004 13:15

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

I'm wondering how to interpret the concept of throat dimension with respect to designs like the Altec A7 (828 cabinet).

The baffle has an 8 X 13 inch opening in it. But on the front side of the baffle the horn opens up to approximately 8 X 17 inches. There's no transition.

Is there an inherent problem with this? Would it be better if the top and bottom surfaces were angled so that the horn section began with an 8 X 13 inch section?

Thanks

http://www.lansingheritage.org/images/altec/catalogs/1978-pro/page11.jpg

Report message to a moderator

[Message index]

		What is the throat dimension of the Altec A7 horn? By: wunhuanglo on Sat, 20 March 2004 13:15
		This geometry is in the Klipschorn as well. By: Bill Fitzmaurice on Sat, 20 March 2004 21:11
		Thanks, Bill ! By: wunhuanglo on Sun, 21 March 2004 05:59
		Is there a conflict?? By: HenryW on Sun, 21 March 2004 07:34
		Re: Is there a conflict?? By: Bill Fitzmaurice on Sun, 21 March 2004 08:13
		Doh - Head is all clea now... By: HenryW on Mon, 22 March 2004 12:24

Previous Topic:	Suppose you had a really big pair...
Next Topic:	Another approach to PVC design

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 15 18:40:31 CDT 2024