AudioRoundTable.com: Speaker » low pass/crossover and different ohms help

Home » Audio » Speaker » low pass/crossover and different ohms help

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

low pass/crossover and different ohms help [message #15769]

Thu, 22 January 2009 18:34

Andrewskaterrr
Messages: 2
Registered: May 2009

Esquire

OK so i have a the JBL Array 4893 sub. They are two 8 ohm subs and I have them wired together on a terminal so they're 4 ohm now. I want to buy a cheap crossover for them. I found this one

http://www.amazon.com/Eminence-PX-250-Pass-Crossover/dp/B000BBS5PU/ref=sr_1_1?ie=UTF8&s=electronics&qid=1232663219&sr=8-1

It's the cheapest crossover I could find (if you know of a cheaper way please tell me). This is at 8 ohm. So I would hook this up to the terminal to connect it to the subs. Now my amp is at 4 ohm and i plan on bridging the sub (2 ohm) so this is what it would look like.

amp crossover subs
2 ohm--->8 ohm---->4 ohm

So my questions are: 1. is my math right? 2. will this work? 3. the crossover freq is 250hz, will this change?

Report message to a moderator

[Message index]

		low pass/crossover and different ohms help By: Andrewskaterrr on Thu, 22 January 2009 18:34
		Re: low pass/crossover and different ohms help By: Wayne Parham on Fri, 23 January 2009 12:25
		Re: low pass/crossover and different ohms help By: Andrewskaterrr on Fri, 23 January 2009 16:05
		Re: low pass/crossover and different ohms help By: Wayne Parham on Mon, 26 January 2009 12:50

Previous Topic:	Hello
Next Topic:	Early 212 JB Lansing in 30's Rickenbacher amp

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 16:37:50 CST 2024