AudioRoundTable.com: Speaker » Enclosing a full range speaker.

Home » Audio » Speaker » Enclosing a full range speaker.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Enclosing a full range speaker. [message #15734]

Mon, 01 December 2008 20:58

Erik
Messages: 9
Registered: May 2009

Esquire

I was interested in enclosing two 8-watt full range speakers into some sort of small cabinet. What sort of cabinet is recommended? What material, how big, any holes...

Report message to a moderator

Re: Enclosing a full range speaker. [message #15735 is a reply to message #15734]

Tue, 02 December 2008 13:57

Bill Wassilak
Messages: 402
Registered: May 2009

Illuminati (1st Degree)

Hard to tell without any speaker parameters.

Report message to a moderator

Re: Enclosing a full range speaker. [message #15736 is a reply to message #15735]

Tue, 02 December 2008 14:12

Erik
Messages: 9
Registered: May 2009

Esquire

What kind of parameters did you need?

Report message to a moderator

Re: Enclosing a full range speaker. [message #15737 is a reply to message #15736]

Tue, 02 December 2008 14:41

Bill Wassilak
Messages: 402
Registered: May 2009

Illuminati (1st Degree)

The Thiele-Small parameters, Fs, Qts, Qes, Vas, Re, etc.etc., the more info the better. Parts express makes a woofer tester for around 100 bucks to measure all those parameters and more.

Report message to a moderator

Re: Enclosing a full range speaker. [message #15738 is a reply to message #15737]

Tue, 02 December 2008 18:00

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Check out the Smith & Larson testers too. Keith Larson made the original one that Parts Express sold. Now they sell a clone. The newer S & L testers do a whole lot more.

Smith & Larson website

Report message to a moderator

Previous Topic:	compression driver Q
Next Topic:	Re: Checking polarity of ribbon tweeters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 07:02:32 CST 2024