Home » Audio » Speaker » Need Help Tuning Vintage Electro Voice Cabinets.
Re: Need Help Tuning Vintage Electro Voice Cabinets. [message #15431 is a reply to message #15429] Fri, 15 December 2006 11:09 Go to previous messageGo to previous message
Bill Wassilak is currently offline  Bill Wassilak
Messages: 402
Registered: May 2009
Illuminati (1st Degree)
Hard to tell since we don't have T/S parameters for the SP15, but the way the box is now, it's tuned to around 62hz and the Fs for the SP15 is 25Hz so your slightly over damped. If it dosen't sound boomy I'd just leave it alone. Other wise just build a bunch of 10x4 frames about 1/4 to 1/2" thick and keep adding them in there to lower the Fb of the cabinet.
HTH
Bill W.

 
Read Message
Read Message
Read Message
Previous Topic: On Q speakers by legrand
Next Topic: Dynauido crosover design
Goto Forum:
  


Current Time: Mon Aug 12 23:34:25 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest